Fence Material Calculator
Turn your fence plan into a shopping list. Pick the fence type, enter the layout, and get every post, rail, picket, panel, bag of concrete and piece of hardware.
What goes into each fence type
Wood privacy and picket fences
4×4 pressure-treated posts set in concrete, 2×4 rails between the posts (2 rails up to 4 ft high, 3 rails above that), and pickets screwed to the rails. Use ground-contact rated lumber for posts and 6×6 posts for heavy gates.
Vinyl fences
Pre-built panels slide into routed 5×5 posts. Line, end, corner and gate posts are routed differently, so order each type separately. Gate posts usually need an aluminum stiffener inside.
Chain link fences
Galvanized fabric stretched between terminal posts, held up by line posts and a top rail. For the full parts breakdown see the Chain Link Fence Calculator.
Assumptions
- Post burial depth is ⅓ of the fence height, at least 2 ft. Each hole gets a 6 in gravel base.
- Typical hole sizes: 10 in for wood 4×4 posts, 12 in for vinyl 5×5 posts, 8 in for chain link posts.
- Concrete is counted in 80 lb bags (25 kg in metric) with 10% extra.