Chain Link Fence Calculator
Get a complete chain link parts list: fabric, posts, top rail and every fitting that holds them together.
Chain link parts explained
- Terminal posts are end, corner and gate posts. They are larger (usually 2-3/8 in OD for homes) because the fabric is stretched against them.
- Line posts (usually 1-5/8 in OD) hold the fabric up between terminals, no more than 10 ft apart.
- Top rail runs along the top of the fence. Sticks are usually 21 ft long and slide into each other at swedged ends.
- Tension bars are woven through the end of the fabric. One per end or gate post, two per corner post.
- Tension bands clamp the tension bar to the terminal post. Use one per foot of height, minus one.
- Brace bands and rail end cups attach the top rail to each terminal post.
- Tie wires fasten the fabric to line posts (about every 12 in) and to the top rail (about every 24 in).
Formulas used
fabric rolls = ⌈ fence length without gates ÷ 50 ft ⌉
top rail = ⌈ fence length without gates ÷ 20.5 ft ⌉ (21 ft sticks, ~6 in overlap)
tension bars = end posts + 2 × corner posts + gate posts
tension bands = tension bars × (height in ft − 1)
brace bands = tension bars
tie wires = line posts × height in ft + fence length ÷ 2 ft
Gates are sold as complete frames. Each gate also needs a set of hinges and a latch. Most gate kits include them.