Fence Concrete Calculator
Work out how much concrete you need to set your fence posts and how many bags to buy. The volume of the post itself is subtracted from each hole.
How the concrete is calculated
Each hole is a cylinder. The gravel at the bottom and the post in the middle take up space, so both are subtracted:
fill depth = hole depth − gravel base
per hole = (π × (hole diameter ÷ 2)² − post area) × fill depth
total = per hole × posts × (1 + extra %)
bags = ⌈ total ÷ bag yield ⌉
Bag yields
Pre-mixed concrete yields about 0.0075 cu ft per pound:
- 40 lb bag ≈ 0.30 cu ft
- 50 lb bag ≈ 0.375 cu ft
- 60 lb bag ≈ 0.45 cu ft
- 80 lb bag ≈ 0.60 cu ft
Fast-setting post mixes yield about the same per pound. They are poured dry into the hole and then soaked with water, so you do not need a mixer.
Tips for setting posts
- Put 4–6 in of gravel at the bottom of each hole for drainage. It helps wooden posts last longer.
- Slope the top of the concrete away from the post so rain runs off.
- Brace the post plumb and let the concrete cure before you hang rails or panels. That is usually 24–48 hours (or about 4 hours for fast-setting mixes).